IG Fabricator Workshop

Schedule of Events

Tuesday, November 7th

12:30 – 1:00 p.m. – Registration
1:00 – 1:55 p.m. – Introduction & Safety Presentation (Mike Burk, Fenestration Fundamentals)
2:00 – 3:00 p.m. – IG Design Presentation (Jeff Haberer, Trulite Glass & Aluminum Solutions)
3:00 – 4:30 p.m. – Workstation 1: Frost Point (Bill Lingnell, IGMA Technical Consultant)

Wednesday, November 8th

8:30 – 9:00 a.m. – Opening Session / Safety Attitudes & Distribution of Safety Equipment (Mike Burk)
9:00 a.m. – 5:00 p.m. – Hands-On Sessions (includes lunch from 12:00 – 12:45 p.m.)

Workstation 2: Glass Cutting (Bill Briese, GED Integrated Solutions)
Workstation 3: Spacer & IG Fabrication (John Kent, Insulating Glass Certification Council)
Workstation 4: Gas Filling (Randi Ernst, FDR Design)
Workstation 5: Desiccant / Desiccated Matrix (Shulin Cui, SliciaStar / Brian White, H.B. Fuller)
Workstation 6: Sealants (Steve Altum, Dow Corning; Paul Chackery, Fenzi NA; Mike Speicher, Royal Adhesives and Sealants)
Workstation 7: Volatile Fog (Jeff Haberer)

5:30 p.m. – Meet the presenters: Join us for a beverage (Homewood Suites by Hilton, 2601 E. Pres. George Bush Highway, Plano, TX 75074)

Thursday, November 9th

8:30 – 9:30 a.m. – Forensic Investigations Presentation (Bill Lingnell, IGMA Technical Consultant)
9:30 – 10:30 a.m. – Workstation 8:  Hands on training to determine logical failure mode of IG units outside of the glazed sash.  The segment starts with the least intrusive visual inspection which, in many instances, can yield a root cause.  If no root cause is determined from a visual inspection the next logical step is unit deconstruction.  IG unit deconstruction will follow a methodical approach to yield a logical cause of failure. (Jim Blamble, SIKA Corporation)
10:30 a.m. – Noon – Tour of Intertek Plano
Noon – Wokshop concludes

 

Event Sponsors

Dow Corning
FDR Design
Fenestration Fundamentals
Fenzi NA
GED Integrated Solutions
HB Fuller
Royal Adhesives and Sealants
SIKA Corporation
SilicaStar
Trulite Glass & Aluminum Solutions

 

REGISTRATION FEES

IGMA Member – $890 USD first attendee / $800 USD each attendee after
Non Member – $990 USD each attendee

EVENT LOCATION

Intertek/ATI
1809 10th St Suite 400
Plano, TX 75074

HOTEL INFORMATION

Homewood Suites by Hilton Plano-Richardson
2601 E. Pres. George Bush Highway
Plano, TX 75074
Reservations: (972) 881-3339

Please identify yourself as being with the group IGMA.

Room Rate: $132
One night deposit required at time of booking.
TAX: all guest room rates are subject to the applicable taxes, currently 13%

CHECK-IN: 3:00 PM
CHECK-OUT: 12:00 NOON

Room cancellations: Individual guest room deposits will be refunded if reservations are cancelled forty-eight (48) hours prior to the day of arrival. Non-cancelled room reservations (those that do not have an appropriate cancellation number) will not be refunded.

Registration